DUGi: Llistar Títols | dc.subject:"Mechanisms"

Llistar Títols

S'han trobat 479 ítems

Llistant ítems des de 100 a 125:

1 2 3 4 5 6 7 8 9 10

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	1 agost 2004	Comparison of Fe-Ni based alloys prepared by ball milling and rapid solidification	Suñol Martínez, Joan Josep ; González Gasch, Àlex ; Escoda i Acero, Ma. Lluïsa
	31 maig 2023	Compressive crack resistance analysis of unidirectional thermoplastic composites	Danzi, Federico
	7 maig 2018	Computational chemistry applied to hydrocarbon functionalization by iron catalysts, oxidation state characterization, and electrides design	Postils Ribó, Verònica
		Computational insight into Wilkinson’s complex catalyzed [2 + 2 + 2] cycloaddition mechanism leading to pyridine formation	Torres Antón, Òscar ; Roglans i Ribas, Anna ; Pla i Quintana, Anna ; Luis Luis, Josep Maria ; Solà i Puig, Miquel
	1 octubre 2014	Computational insight into Wilkinson’s complex catalyzed [2 + 2 + 2] cycloaddition mechanism leading to pyridine formation	Torres Antón, Òscar ; Roglans i Ribas, Anna ; Pla i Quintana, Anna ; Luis Luis, Josep Maria ; Solà i Puig, Miquel
	14 gener 2020	Computational mechanistic studies of C-H and C-X activated organometallic species with first-row transition metals	Roldán Gómez, Steven
	26 setembre 2022	A computational micromechanics investigation of longitudinal strength in unidirectional fibre reinforced composites	Barzegar, Mostafa
	17 gener 2020	A constitutive model for fatigue and residual strength predictions of composite laminates	Llobet Vallejo, Jordi
	25 juny 2013	Contribución a la fundición selectiva por láser de pieza metálica mediante el estudio de propiedades mecánicas y de manufactura	Delgado Sanglas, Jordi
		Contribución a la fundición selectiva por láser de pieza metálica mediante el estudio de propiedades mecánicas y de manufactura	Delgado Sanglas, Jordi
	26 octubre 2017	A contribution to the understanding of compression after impact of composite laminates	Liv, Yi
	31 maig 2023	Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures	Pakkam Gabriel, Vivek Richards
	2008	Critical ruptures in a bundle of slowly relaxing fibers	Kovács, K. ; Nagy, S. ; Cruz Hidalgo, Raúl ; Kun, F. ; Herrmann, H.J. ; Pagonabarraga Mora, Ignacio
		Critical ruptures in a bundle of slowly relaxing fibers	Kovács, K. ; Nagy, S. ; Cruz Hidalgo, Raúl ; Kun, F. ; Herrmann, H.J. ; Pagonabarraga Mora, Ignacio
	31 maig 2023	Damage inception of composite under dynamic loadings	Pernas-Sánchez, Jesús
	31 maig 2023	Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test	Fernández Chamorro, Alex
		Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
		Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
		Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
	1 juny 2018	Damage tolerance optimization of composite stringer run-out under tensile load
	5 juny 2018	Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
	15 febrer 2020	Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
	1 desembre 2015	Damage tolerance optimization of composite stringer run-out under tensile load	Badalló i Cañellas, Pere ; Trias Mansilla, Daniel ; Lindgaard, Esben
		A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test	Pérez Galmés, Magdalena ; Renart Canalias, Jordi ; Sarrado Molina, Carlos ; Rodríguez Bellido, Ana Teresa ; Costa i Balanzat, Josep
	1 novembre 2016	A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test	Pérez Galmés, Magdalena ; Renart Canalias, Jordi ; Sarrado Molina, Carlos ; Rodríguez Bellido, Ana Teresa ; Costa i Balanzat, Josep

1 2 3 4 5 6 7 8 9 10

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors